- Development Applications
- Development Information for the Community
-
Building and Construction
-
Building and Development Information Guides
- Advertising Signage
- Air Conditioning
- Asbestos
- Boarding Houses and Co-living
- Building Height Explained
- Carport
- Change of Use
- Demolition
- Fences
- Fire Places - Domestic Oil and Solid Fuel Heating
- Garage
- Home Based Commercial Enterprises (HBCE)
- Home Building Compensation Fund (HBCF)
- Lead Paint
- Mobile Business
- Owner Builders
- Pollution Signs
- Retaining Wall
- Secondary Dwellings - Granny Flats
- Shed
- Shipping Containers
- Short Term Rental Accommodation
- Studio
- Solar Panels
- Subdivision
- Swimming Pool/ Spa
- Temporary Events and Uses on Private Land
- Tiny Houses
- Construction Certificates
- Driveway Inspection Request
- Fire Safety
- Flood Certificates
- Principal Certifier, Building Inspections and Occupation Certificates
- Road Naming
- S10.7 Planning Certificates
- Street Numbering
- Swimming Pool Requirements
-
Building and Development Information Guides
- Strategic Land Use Planning
- Development / Building and Construction / Building and Development Information Guides / Fire Places - Domestic Oil and Solid Fuel Heating
There are two types of fireplaces also known as solid fuel heaters:
- Built in fireplace – usually constructed of brick or stone that is built into the structure of the building
- Stand-alone fireplace – standalone structure with only the flue going through the wall or ceiling and roof
Yes, if it is a built-in fireplace.
No, if it is a stand-alone fireplace – as long as there is no structural work involved. Putting a hole in the ceiling and roof sheeting for a flue can be considered minor building alterations and can be exempt under the State Environmental Planning Policy (Exempt and complying development codes) 2008.
Please note that if the work is associated with a heritage item or within a heritage conservation area the above may not apply, please contact our Duty Officer on 02 4974 2000 to discuss further.
Before you install any fireplace, you must obtain approval from Council, apply at: Section 68 Activity under the Local Government Act, 1993.
The installation of a fireplace will need to comply with the BCA and Australian Standards, reputable installers will be able to advise you of these.
- Pursuant to section 6 of Part 2 of the Regulation, all heaters sold in NSW must have a certificate of compliance affirming that the model of heater meets the relevant Australian and New Zealand (AS/NZS) Standards. This certificate must be issued by a body approved by the Environmental Protection Authority (EPA).
- At the point of purchase, you should check with the retailer to see whether the appliance you are considering purchasing complies with the relevant Australian Standards under the Regulation.
Harmful pollution generated by wood heaters and open fireplaces can be drastically reduced if they are used correctly. The tips contained in the links below help ensure you get the most from your wood heater and reduce the impact of wood smoke on your neighbours and family.
